![]() ![]() environment (external influences) - they may affect heating / cooling as well also mutual position of few objects may affect cooling or act as wall for wind.cooling system - sometimes printer has better cooling from one side (depending on location of fans or construction of cooling ducts), so any overhangs (fragments which have to cool down very quickly) should be properly exposed, otherwise they will wrap.heating system - heated bed surface may be warmer at center even if the bed is heated evenly, than surface will cool down faster at sides, which may affect adhesion (e.g.Placing itemsĪlso, placing items on the build plate should consider: Try to look at thing from different sides, spatial awareness helps a lot. So most of it comes from particular shape. space - if the thing is big, it may have to be rotated diagonally to fit the printing surface.adhesion - it is good to have wide foot to touch and stick to the bed, then only thin base growing big upwards, which may easily fail by any accident.layered structure - parts will be stronger in X-Y directions, and weaker in Z direction.overhangs - many hangning fragments will need additional support to be printed (cost of time and material, risk of failure) gravity and colling process will affect loose/hanging plastic in this or that way.Orienting items on the build plate should consider:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |